Filming and Neutralising Amine based High Pressure Boiler Water Treatment (INNOVA BW 340) In Italy

Specifically for controlling corrosion in the condensate system. Uses AV Technology combined with selected blends of neutralising amines to give protection from oxygen and carbon dioxide induced corrosion. Application over a wide range of pressures.

A novel combination product for protecting the entire system. Controls oxygen induced corrosion in the feed line and boiler as well as corrosion induced by oxygen and carbon dioxide in condensate. Mainly applicable to low and medium pressure installations.

Essentially an alternative to hydrazine in the "zero solids" approach to oxygen scavenging. Being of similar strength to commercially available hydrazine, minimum alteration is required to existing dosing arrangement. It is less toxic than hydrazine and reacts faster with oxygen. Does not produce ammonia, therefore, non-corrosive to copper and its alloys.



Appearance: Clear Liquid


pH: 9.0 to 10.0


Wt/ml : 0.9 to 1.0


Flammability: Non-Flammable


  • Application:

    For convenience the three integral parts of the system boiler system are considered separately.


  • Application Methodology:

    For convenience the three integral parts of the system boiler system are considered separately.


    • Compatibility:

      INNOVA BW 340 is compatible with most chemicals used in total boiler water treatment programs.


    • Handling:

      Avoid contact with eyes or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water for at least 10 to 15 minutes and seek immediate medical attention. Remove contaminated clothing and in severe cases seek immediate medical attention. Wear gloves and goggles wherever appropriate.


    All Vapour Technology :

  • Strong reducing properties
  • Rapid reaction rate with oxygen
  • Volatility
  • Broad spectrum vapour/liquid distribution ratio
  • Low conductivity in aqueous solutions.
  • Low toxicity.
  • A total solution for boiler protection.

  • Feed System:

    Because of its strong reducing properties INNOVA BW 340 converts red brown ferric oxide to the more desirable ferroso-ferric oxide (magnetite), its reaction rate with oxygen is faster than that of catalysed hydrazine, an important factor relative to feed water flow rate for greater protection to the whole system.


  • The Boiler:

    As well as its strong reducing properties and rapid reaction rate with oxygen, INNOVA BW 340 does not significantly contribute to dissolved solids in the boiler water. It may, therefore, be used as an alternative to hydrazine for high pressure installation or wherever the zero solids approach is called for.


  • Condensate System:

    In addition to the properties already considered, the volatility of INNOVA BW 340 is such that any product remaining unreacted in the boiler, is available in the system to react with oxygen in the condensate. The broad spectrum distribution ration ensures its uniform availability throughout the entire condensate system. As reaction products do not include ammonia and or ammonia releasing chemicals, copper and its alloys are not attacked.


  • Availability & Selection:

    All Vapour Technology (AVT) is applicable to the majority of steam boiler systems as well as pressurised hot water systems which demand a zero solids approach. However, systems differ greatly not only in terms of size and complexity, but also in terms of pressure. In order that maximum benefits can be achieved from AV Technology in virtually any system, the products based on zero solids approach, INNOVA BW 340 have been introduced.


  • Packing:

    INNOVA BW 340 is available in 25kgs, 50 kgs & 200 kgs drums.

To Know More Click On The Products From Product List Or.

Call Us at

  • +91-9312-871-070
  • +91-9911-130-697
  • +91-9911-981-992

  • Or E-mail Us at