Manufacturers, Exporters and Suppliers of INNOVA BW 341 – Alkalinity Builder & pH Booster for High Pressure Boiler Water Treatment in Amritsar

Innova Corporate (India) offers High Pressure Boiler Water Treatment 342 – a chelant-polymer-phosphate coordinated program for medium-to-high pressure boilers (20-60 bar/290-870 psi) in Amritsar's industries that use softened water (hardness <2 ppm, but not full demineralized). This product contains EDTA or NTA chelants, polyacrylic acid dispersant, and orthophosphate/polyphosphate. The chelants complex any residual hardness (calcium, magnesium) to prevent scale, while the polymer disperses suspended solids, and phosphate buffers pH and precipitates any excess hardness as a mobile sludge. For Amritsar's textile processing units (Verka) and leather tanneries (Jalandhar Road) with softened water (from ion exchange or RO), HP-342 is ideal. It maintains clean boiler tubes at heat fluxes up to 200,000 kcal/hr/m², even with Ravi river water after softening. Dosage: 20-100 ppm based on feedwater hardness (measured as CaCO₃). The product is supplied as a liquid (30-40% active) or powder blend. For Amritsar's hotels near Golden Temple and Ranjit Avenue with medium-pressure boilers (laundry, kitchen steam), we recommend this treatment to avoid scale-related tube failures during peak tourist season (October-March, high demand). It also contains a sludge conditioner (tannin or lignosulfonate) to keep precipitates fluid for blowdown removal. We provide on-site boiler water analysis (hardness, P-alkalinity, M-alkalinity, chloride, phosphate, pH, conductivity) to optimize blowdown and chemical consumption. For steam purity sensitive applications (textile dyeing where steam is injected directly into fabric, or food processing where steam contacts food), our formulation has low solids to prevent contamination. Available in 200L drums, 25kg bags (powder). For old boilers with existing scale (common in Amritsar's older tanneries), we recommend cleaning with our descaling chemicals before starting HP-342. Technical support includes boiler inspection (UT thickness, borescope) and blowdown optimization to reduce water and energy waste, complying with PPCB water conservation norms.