Manufacturers, Exporters and Suppliers of Fire Side Chemicals – Soot Removers & Slag Dispersants for Boiler Furnace Efficiency in Amritsar

Innova Corporate (India) offers Fireside Treatment Chemicals for Amritsar's industrial boilers and furnaces – addressing low-temperature corrosion, slagging, fouling, and soot deposits. In Amritsar, industries such as leather tanneries, textile processing, food processing, and hotels use a variety of fuels: furnace oil (FO), light diesel oil (LDO), coal, petcoke, and biomass (rice husk, wood waste). When burning high-sulfur fuels (especially FO and petcoke), combustion produces acidic compounds (SO₂, SO₃) that condense on cooler surfaces (air preheaters, economizers, ID fans) causing low-temperature corrosion (dew point corrosion). Additionally, ash-containing fuels (coal, biomass) cause slagging and fouling on superheater and furnace walls. Our fireside products include: magnesium hydroxide slurries (50-60%), dolomite-based powders (CaMg(CO₃)₂), fuel-borne catalysts (organo-metallic compounds – ferrocene, cerium, manganese), and slag control additives (aluminum silicate, magnesium oxide based). For furnace oil-fired boilers in Amritsar's tanneries (for steam in beamhouse operations), our magnesium hydroxide additive (0.1-0.5% of fuel flow) neutralizes vanadium and sulfur acids, reducing dew point corrosion. For biomass-fired boilers (some textile units use rice husk or wood waste), we offer slag control additives to prevent clinker formation (sintered ash) on furnace grates and superheater tubes. For petcoke/coal-fired boilers (if any in Amritsar's engineering units), our fuel additive reduces SO₃ formation and improves ash fusion temperature. Typical dosage: 0.5-2 kg per ton of fuel (solid) or 0.1-0.3% for liquid fuels. Our products also reduce SO₃ dew point, allowing flue gas temperatures to be lowered (by 10-20°C/18-36°F) without corrosion – improving boiler efficiency by 2-4%. For Amritsar's hotels with packaged boilers (using LDO or FO for laundry and kitchen steam), we supply fireside corrosion inhibitors in liquid form injected into the fuel line. For captive power plants (some large tanneries have cogeneration), we provide ammonium bisulfate (ABS) prevention chemicals for SCR/DeNOx systems. All products are safe to handle (non-hazardous). Available in 25kg bags (powder) and 200L drums (liquid). We also provide flue gas analysis (SO₂, O₂, CO, NOx, SO₃ dew point) to optimize dosing and demonstrate ROI (fuel savings). For Amritsar's industries facing PPCB emission norms, we help reduce fuel consumption and emissions.

Deposits of slag and ash on the fireside of boilers in Amritsar can reduce efficiency and damage tubes. Our chemical solutions reduce these deposits and gradually remove existing slag. This combination additive in powder form is designed for the prevention of fireside deposits on all types of boilers, tubes, heaters, flunkies, and economizers, keeping your systems clean from soot, clinker, fouling, and corrosion.