Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Amritsar

Innova Corporate (India) offers Flocculant Cationic Poly Electrolyte PE-613 – a very high molecular weight (>15 million Da), low charge density (10-20 mole%) cationic polyacrylamide (CPAM) for sludge dewatering and high-solids clarification in Amritsar's effluent treatment plants, especially for municipal sewage, tannery mixed sludge, and textile biological sludge. This polymer produces large, shear-resistant flocs that release water readily, ideal for belt press, centrifuge, and screw press dewatering. For Amritsar's municipal sewage treatment plants (STPs) – including those serving the Golden Temple area and other parts of the city – PE-613 is highly effective for dewatering activated sludge (which has high microbial content and colloidal structure). For tannery CETP at Jalandhar Road, where sludge is a mixture of biological sludge and chemical sludge (from chrome precipitation and sulfide oxidation), PE-613 achieves cake solids of 25-30%, reducing disposal cost by 40% (lower trucking volume). For textile ETPs in Verka, where sludge contains dyes and biological matter, this polymer works well because its low charge density minimizes over-charging and floc breakup. The product is supplied as white free-flowing granules (100% active). It must be dissolved at 0.1-0.3% concentration in soft water (preferably warm water 30-40°C/86-104°F) with gentle stirring for 30-60 minutes. Aging for 60 minutes improves flocculation. Dosage: 3-12 kg per ton of dry solids, or 2-10 ppm in the sludge feed stream. For Amritsar's hotel STPs (near Golden Temple, many have on-site treatment), PE-613 effectively dewaters activated sludge from small package plants with minimal polymer consumption. We also provide on-site polymer selection via jar testing and capillary suction time (CST) analysis – we bring portable CST timers to your facility. The product is anionic incompatible – do not mix with anionic polymers. Available in 25kg bags with inner polyliner. For automatic preparation, we supply polymer make-down units (volumetric screw feeder + wetting cone + aging tank). Technical data: charge density 1.2-1.5 meq/g, residual monomer <0.05% (very low – safe for discharge). Also available as liquid emulsion (30-50% active) for easier handling.