Manufacturers, Exporters and Suppliers of ETP Cationic Poly Electrolyte – Sludge Dewatering & Flocculation Chemical for Effluent Treatment Plants in Amritsar

Innova Corporate (India) supplies ETP Cationic Poly Electrolyte – a high molecular weight (8-15 million Da), medium to high charge density (20-50 mole%) cationic polyacrylamide (CPAM) for sludge dewatering and clarification in Amritsar's effluent treatment plants (ETPs), common effluent treatment plants (CETPs), and sewage treatment plants (STPs). This polymer is highly effective for organic and mixed industrial sludges from leather tanneries (chrome sludge, biological sludge), textile mills (dye sludge), food processing (FOG-rich sludge), and municipal sewage. The cationic charge neutralizes the negative charge of suspended solids, bacterial flocs, and colloidal particles, causing rapid flocculation, compaction, and water release. For Amritsar's tannery CETP at Jalandhar Road (which produces high volumes of biological sludge mixed with chromium hydroxide), our CPAM achieves sludge cake solids of 20-25% using a centrifuge or belt press, significantly reducing sludge disposal costs (landfill or incineration). For dairy and food processing ETPs (papad, pickles, spice), the same polymer dewaters sludge containing fats and proteins, producing a cake that can be used as a low-grade fertilizer (after composting). For textile ETPs in Verka with mixed chemical-biological sludge, our high-charge CPAM (40-50% charge) captures fine dye particles. The product is supplied as a white granular powder (100% active) with a charge density of 30-40% (customizable). It should be made down to 0.1-0.5% solution in clean, soft water (avoid high-speed mixing to prevent shear degradation). For continuous dewatering equipment (belt filter press, screw press, centrifuge), we provide automatic polymer make-down units that age the solution for 30-60 minutes before dosing. Dosage: 2-10 kg per ton of dry solids, or 5-25 ppm in the feed stream. For Amritsar's CETP handling a mix of tannery, textile, and domestic waste, we recommend jar test series to determine optimal polymer type (charge density and molecular weight) – wastewater composition varies by season (monsoon dilution vs summer concentration). We supply all common ionicities and molecular weights. Available in 25kg bags with inner moisture-barrier liner. For large users (CETPs treating >10 MLD), we supply 500kg super sacks. We provide on-site trial support and polymer selection guidance (CST testing). For sludge thickening (gravity belt thickener), use a lower MW CPAM to avoid over-flocculation. We also offer emulsion cationic polyelectrolytes (30-50% active) for easier handling and rapid make-down.

Due to its adherence and reinforcing properties, Cationic Polyelectrolyte is widely used in the paper-making industry across Amritsar to enhance the staying rate of filling material, speed up size filterability, and white water sediment processing, ultimately increasing paper strength. Furthermore, PAM can be used with polyvinyl alcohol as a textile size to improve textile processing and enhance product properties for manufacturers in the Amritsar region.