Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BW 274 – Deposit Controller for Scale & Sludge Dispersion in Boiler & Cooling Systems in Amritsar

 Deposit Controller (INNOVA BW 274)
Deposit Controller (INNOVA BW 274) in Amritsar

Deposit Controller (INNOVA BW 274) in Amritsar

Innova Corporate (India) offers Deposit Controller 274 – a multifunctional liquid formulation for Amritsar's cooling water systems, blending phosphonates (HEDP, ATMP), polyacrylate copolymer (AA/AMPS), tolyltriazole (for copper), and a zinc salt (cathodic inhibitor). It provides scale inhibition, corrosion protection, and dispersion in one drum, ideal for small-to-medium cooling towers in Amritsar's leather tanneries (Jalandhar Road), textile mills (Verka), hotels (near Golden Temple), and food processing units that lack sophisticated chemical feed systems. Deposit Controller 274 effectively prevents calcium carbonate scale at LSI up to +2.0, disperses iron oxides, silt, and clay (common in Ravi river water during monsoon), and protects mild steel (corrosion rate <2 mpy) and copper alloys (<0.5 mpy). For Amritsar's typical make-up water – Ravi river water (hardness 400-700 ppm, alkalinity 250-400 ppm) or groundwater (hardness 500-800 ppm, TDS 1000-2000 mg/L) – a dosage of 50-150 ppm maintains clean heat transfer surfaces and extends equipment life. The product is stable up to 60°C (140°F) and pH 6.5-9.5, and is compatible with oxidizing biocides (chlorine, bromine) at typical residuals (0.5-1 ppm free chlorine). For best results, maintain pH 7.8-8.5 (acid feed may be needed if alkalinity is high). Deposit Controller 274 is supplied as a clear amber liquid with specific gravity 1.15-1.20. It can be dosed via electronic metering pump proportional to make-up water flow. We provide test kits for total phosphate, zinc, and conductivity for on-site monitoring. For Amritsar's seasonal hotel operations (some facilities reduce load in off-season), we offer a winter lay-up treatment using the same product at higher concentration (500 ppm) to protect idle systems. Available in 25L, 200L drums, and 1000L IBCs. For tannery CETP cooling towers, this deposit controller helps prevent scale in heat exchangers and reduces maintenance downtime.

Advantages:

  • Works Excellent With High Alkalinity Water.
  • Affords Excellent Corrosion Protection.
  • Prevents Deposition Of Hardness Salts.
  • Ensures High Mobility Of Phosphate Sludge.
  • Good Dispersion Of Suspended Particulate Matter.
  • Simple Control Tests.
  • Compatible With Total Water Treatment Programmed.
  • Easy To Use And Control.
  • Not Corrosive To Feed Equipment.

Dosage & Feeding:

    INNOVA BW 274 can be dosed directly by dissolving up to 5% in the best quality of water available. The proper treatment levels vary with factors like boiler system, operating conditions, boiler pressure and water Characteristics. The desired feeding mode is the continuous injection to feed water. Use sufficient quantity of INNOVA BW 274 to maintain recommended phosphate residual in the boiler water.

Handling:

    Keep the container closed when not in use. Avoid contact with eye or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water..

Compatibility:

    INNOVA BW 274 is compatible with almost all products used in total boiler water Treatment program.

Packing:

    INNOVA BW 274 is available in 25kgs, 50 kgs & 200 kgs drums.