Manufacturers, Exporters and Suppliers of INNOVA PE 605 – Cationic Polyelectrolyte Coagulant for Sludge Dewatering & Wastewater Treatment in Amritsar

Innova Corporate (India) offers Coagulant Cationic Poly Electrolyte PE-605 – a medium molecular weight (1-2 million Da), high charge density (6-8 meq/g) liquid polymer for Amritsar's industrial wastewater pretreatment – especially for tanneries (beamhouse, tanning, finishing), textile mills, dairy effluent, and food processing (papad, pickle, spice). PE-605 works by charge neutralization and bridging flocculation, converting fine colloidal particles (size 0.1-10 µm) – such as fats, oils, greases (FOG), proteins, anionic surfactants, and dispersed dyes – into larger flocs that settle rapidly or float (in DAF). For Amritsar's dairy effluent (from milk chilling centers, paneer, ghee units), which has high organic load (COD 3000-8000 mg/L) and FOG (500-2000 mg/L), PE-605 reduces TSS from 2000 ppm to <100 ppm and FOG by 90% at 80-120 ppm dosage. For leather tanneries (beamhouse waste containing fleshings, hair, lime, sulfide), it effectively precipitates suspended solids and reduces sulfide odor. For textile processing effluents (desizing, scouring, dyeing), it removes polyvinyl alcohol (PVA), starches, and waxes. The product is effective over pH 5-11 and can be used in conjunction with inorganic coagulants (alum, PAC, ferric chloride) to reduce overall chemical cost. For Amritsar's food processing units (papad, pickle, spice grinding), the coagulant clarifies high-suspended-solids wastewater. Dosage optimization via jar testing is essential – we provide portable jar test apparatus and training for Amritsar's ETP operators. The polymer is supplied as a 0.2-0.5% solution (make down in clean, soft water; aged for 30-60 minutes). For continuous treatment, we recommend a dosing skid with static mixer, aging tank, and metering pump. For powder form (100% active), we supply in 25kg bags with a make-down unit. The product is non-toxic and biodegradable (40-60% after 28 days), and the sludge produced is non-hazardous. For Amritsar's common effluent treatment plant (CETP) for tanneries at Jalandhar Road, PE-605 is used as a primary coagulant before dissolved air flotation (DAF), achieving 90% removal of suspended solids and 70% removal of COD. Available in 200L drums and 1000L IBCs (liquid). Technical support includes on-site flocculation testing and dose adjustment based on influent variability.