Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of INNOVA BCD 416 – Di Bromo Nitrilo Propionamide (DBNPA) Based Biocide for Industrial Water Treatment in Amritsar
Biocides Di Bromo Nitrilo Propioniamide Based (INNOVA BCD 416) in Amritsar
Innova Corporate (India) supplies DBNPA-based biocide (20% active liquid or solid granular) – a fast-acting, non-oxidizing antimicrobial for Amritsar's industrial water treatment where rapid microbial kill and short environmental half-life are required. DBNPA (2,2-dibromo-3-nitrilopropionamide) is highly effective against bacteria (including SRB – sulfate-reducing bacteria), iron bacteria, slime-forming organisms, and fungi – all of which thrive in Amritsar's warm cooling waters (30-45°C/86-113°F). The key advantage for industries located near Ravi river or those subject to Punjab Pollution Control Board (PPCB) discharge norms is its rapid hydrolysis: within 4-12 hours, DBNPA breaks down into non-toxic, biodegradable byproducts, making it acceptable for discharge into CETPs or the river. For Amritsar's leather tanneries, DBNPA is used as a shock biocide in cooling towers, beamhouse recirculation loops, and lime yard water. For reverse osmosis (RO) systems in tanneries (chrome recovery, water recycle), DBNPA is a membrane-compatible sanitizer (50-100 ppm for 2-4 hours recirculation) – it does not damage polyamide membranes. For textile processing units, it controls slime in jet dyeing machine cooling loops. For cooling towers in hotels near Golden Temple and hospitals, a weekly shock dose of 50-100 ppm DBNPA for 4-6 hours achieves a 4-6 log reduction in planktonic bacteria. The product does not foam, even under high aeration. Incompatible with reducing agents (sodium sulfite, sodium metabisulfite) – separate feed points required. Available in 25L pails (liquid), 200L drums, and 20kg bags (granular). For smaller operations (e.g., individual tanneries or food units), we offer pre-measured water-soluble packets. Storage: keep below 30°C (86°F) – Amritsar's summer heat requires air-conditioned storage. Shelf life: 12 months.
Advantages in Amritsar:
- INNOVA BCD 416 can be considered as an oxidizer, since bromine content it oxidize bacterial substrate found in regional water sources.
- It functions in conjunction with chlorine to provide comprehensive sanitation for local systems.
- INNOVA BCD 416 is suitable for once through cooling systems in Amritsar, because of its fast acting biocidal action (contact time often less than 1 hour).
Dosage for Amritsar Operations:
Dosage in cooling water treatment programs is 25 to 35 ppm for effective control of biocide activity for cooling waters across Amritsar.
Method of Feeding :
INNOVA BCD 416 can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.
Feed Requirements :
Badly fouled systems must be cleaned before treatment to start. Initial Dose - When the system is noticeably fouled, slug feed 35 to 55 ppm of INNOVA BCD 416 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 25 to 50 ppm of INNOVA BCD 416.
Control Testing :
The best indication of the successful application of INNOVA BCD 416 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment.
Uses of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved.
Packing :
INNOVA BCD 416 is available in 25Kgs, 50Kgs & 200 Kgs.