Innova Corporate (India) offers Antiscalant-275, a high-performance liquid formulation for Amritsar's industrial water systems facing calcium carbonate and calcium sulfate scale. Industries in Amritsar rely heavily on Ravi river water (hardness 400-700 ppm, TDS 800-1500 mg/L, moderate seasonal turbidity) and groundwater (hardness 500-800 ppm, high TDS and alkalinity). This leads to severe scale formation on reverse osmosis membranes, cooling towers, heat exchangers, and boiler tubes in leather tanneries (Jalandhar Road cluster), textile processing units (Verka area), food processing (papad, pickle, spice), hotels (near Golden Temple), and hospitals. Antiscalant-275 employs a proprietary blend of phosphonate (HEDP, ATMP, PBTC) and carboxylate polymers (polyacrylic acid, maleic-acrylic copolymers) that effectively inhibit scale at LSI up to +2.5 with low dosages (2-6 ppm). For Amritsar's leather tanneries operating RO plants for chrome recovery and water recycling, this product extends membrane cleaning intervals by 50% and reduces downtime. For textile processing units using hard groundwater, it prevents scale in jet dyeing machines and heat exchangers. The product is stable over pH 5-11 and tolerates temperatures up to 90°C (194°F) – critical for Amritsar's summer peaks (45°C/113°F) when feed water temperatures exceed 35°C. It also disperses iron oxides, silt, and suspended solids from Ravi water. Compatible with chlorine and non-oxidizing biocides. For food processing units (papad, pickle, spice), we offer a low-phosphorus variant to meet PPCB discharge limits. Available in 25L, 200L drums, and 1000L IBCs. We provide on-site water analysis and dosage optimization for Amritsar's industries.
INNOVA BW 275 also contains powerful threshold inhibitor to prevent scale formation in feed water pipelines and boiler internals.The crystal distorter and specific dispersant incorporated in the product ensures high mobility of the phosphate sludge formed so that it is easily removed by blow down. The dispersant also ensures that suspended particulate matter do not accumulate and are removed by the blow down.
INNOVA BW 275 can be dosed directly by dissolving up to 5% in the best quality of water available. The proper treatment levels vary with factors like boiler system, operating conditions, boiler pressure and water Characteristics. The desired feeding mode is the continuous injection to feed water. Use sufficient quantity of INNOVA BW 275 to maintain recommended phosphate residual in the boiler water.
Keep the container closed when not in use. Avoid contact with eye or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water.
INNOVA BW 275 is compatible with almost all products used in total boiler water treatment program.
INNOVA BW 275 is available in 25kgs, 50 kgs & 200 kgs drums.