Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 609 – Ionic Poly Electrolyte Flocculant for Solid-Liquid Separation in ETP & STP in Dubai

Flocculant Ionic Poly Electrolyte - INNOVA PE 609
Flocculant Ionic Poly Electrolyte - INNOVA PE 609 in Dubai

Flocculant Ionic Poly Electrolyte - INNOVA PE 609 in Dubai

Innova Corporate (India) supplies Flocculant Ionic Poly Electrolyte PE-609 – a medium molecular weight (6-8 million Da), high charge density (30-40 mole%) cationic polyacrylamide for dissolved air flotation (DAF) systems and primary clarification in Dubai's industrial wastewater treatment. For food processing (date, dairy, seafood), PE-609 rapidly flocculates suspended solids, allowing DAF units to remove >90% of TSS at 5-15 ppm dosage. For textile mills (dyeing and finishing), it effectively captures dyes and starches. For pharmaceutical ETPs (batch reactors), it flocculates suspended solids. For seafood processing plants (Jebel Ali), it clarifies protein and fat-laden wastewater. The product is supplied as a white granular powder (100% active) with rapid solubility. For Dubai's CETPs that use DAF as primary treatment (e.g., food processing CETPs), PE-609 is often dosed at 2-20 ppm after a coagulant (PAC or ferric). It works over pH 5-10. For best results, use with a coagulant (alum, PAC, or ferric chloride) ahead of the flocculant. We provide DAF pilot unit (skid-mounted) for on-site trials. Available in 25kg bags. Also available as a liquid emulsion (40-50% active) for easier handling. For Dubai's CETP serving food and textile, this polymer is a standard component. Technical support includes flocculation time measurement (jar test) and air-to-solids ratio optimization for DAF.

Features :

  • Higher settling rates in subsider - Increases through puts from the clarifier.
  • Lower retention time - Reduction in sugar inversion.
  • Reduction in lime addition - Improved sugar juice quality
  • Reduction in mud volume - compact filter cakes with low pol content.
  • Higher filteration rates - low pol content in mud cakes.

Dosage & Feeding:

    Recommended dosage is in the range of 0.5 to 1.0 ppm depending on juice quality.

Juice Clarification Contains Two Major Parts:

    1. Coagulation: - Destabilization of colloidal particles by neutralizing forces that keep them apart which is accomplished by the additional lime.

    2. Flocculation: - Agglomeration of colloidal particles into flocs and these flocs create large clusters and settle down faster.

    INNOVA PE 609 is high molecular weight Ionic flocculants completely soluble in water. This flocculant has been developed to improve the settling Characteristics of lime dificated juices and enhance the filtration Characteristics of the resulting mud.

    This product is effective over wide range of pH and have great flexibility in coping with fluctuation in operating conditions with their remarkable settling properties they rapidly bring down clarifier mud levels under control when 'difficult' juices are treated. Uses of this flocculant also improve the filterability of the mud by rapidly forming filter cake of excellent porosity. Uniform composition and consistency.

Storage & Handling :

    INNOVA PE 609 is stable and can be stored for extended period of time. Product should be stored in a cool, dark place away from direct sunlight. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Directions of Use :

    Prepare stock solution (0.05 to 0.1% w/v) of the INNOVA PE 609 using clear filtered water. Prepare feed solution by diluting the stock solution about ten times with filtered water (directly or by online dilution).

Storage & Handling :

    INNOVA PE 609 is available in 25 kg plastic container & bag.