Manufacturers, Exporters and Suppliers of Copolymers for Water Treatment – Antiscalants & Dispersants for Industrial Systems in Bihar

Innova Corporate (India) offers high-performance copolymers – scale inhibitors and dispersants based on maleic acid, acrylic acid, and sulfonic acid copolymer chemistry. These polymers are essential for Bihar's water treatment applications where phosphonate-based antiscalants alone are insufficient, especially in cooling towers and boiler systems operating at elevated cycles of concentration (3-5x) due to water scarcity in summer. Our copolymers include: AA/AMPS (acrylic acid/acrylamido methyl propane sulfonic acid) – excellent for calcium carbonate, calcium phosphate, and iron oxide control, with high tolerance to chlorine and temperature up to 120°C; AA/HPA (acrylic acid/hydroxypropyl acrylate) – good for iron dispersion; MA/AA (maleic/acrylic, typically 1:1 ratio) – high thermal stability (up to 200°C) and excellent calcium carbonate inhibition, ideal for boilers; MA/VA (maleic/vinyl acetate) – for low pH applications; and terpolymers (AA/AMPS/MA or AA/AMPS/VA) – for superior performance across multiple scales (carbonate, phosphate, silicate, sulfate). For Bihar's cooling towers operating at pH 8.5-9.0 and 40-45°C, AA/AMPS copolymers prevent calcium carbonate scaling even at LSI +2.5. They also disperse iron oxides, clay, and silt – critical during monsoon when Ganges water carries fine silt (up to 1000 NTU). For sugar mills and rice mills where cooling water may have high iron content, AA/AMPS is highly effective. For boilers (especially medium-pressure 10-30 bar in sugar and food plants), MA/AA copolymers (MW 1500-5000) provide excellent thermal stability and sludge conditioning. For reverse osmosis antiscalant formulations (for ZLD in sugar mills), these copolymers are key components, especially for high-silica and high-iron feeds. The molecular weight range for scale inhibitors is 2,000-15,000 Da – lower MW (2k-5k) for threshold inhibition (crystal modification), higher MW (8k-15k) for dispersion of pre-formed particles. All our copolymers are thermally stable up to 120-200°C depending on composition. They are compatible with all common biocides (oxidizing and non-oxidizing) and corrosion inhibitors (orthophosphate, zinc, molybdate). Available as 30-50% active liquids and in powder form (90-95% active) for dry blending. For Bihar's industries looking to reduce phosphonate use (to meet BSPCB discharge limits), we offer copolymer-only programs where the copolymer is the primary scale inhibitor. Dosage: 2-10 ppm in cooling water, 5-25 ppm in boiler feed. We supply test methods for polymer concentration (turbidimetric titration with Hyamine 1622 or Toluidine Blue). Pack sizes: 200L drums, 1000L IBCs (liquid), 25kg bags, 500kg super sacks (powder).