Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of Antiscalant INNOVA MT 065 – For High Sulphate Water in RO & Desalination Systems in Bihar

Antiscalant For High Sulphate Water (INNOVA MT 065)
Antiscalant For High Sulphate Water (INNOVA MT 065) in Bihar

Antiscalant For High Sulphate Water (INNOVA MT 065) in Bihar

Innova Corporate (India) offers an Antiscalant for High Sulphate Water for Bihar's industrial sites where sulfate levels can be elevated, especially near industrial zones. High sulfate with calcium leads to hard-to-remove gypsum scale (CaSO₄·2H₂O). Our antiscalant uses polyacrylate-sulfonate copolymers (AA/AMPS) to prevent scale in cooling towers and RO systems, even at 120% supersaturation. For sugar mill ZLD facilities and textile units, this enables recovery ratios >85% without sulfate scaling, a critical factor for maintaining the purity of the Ganges. Available in 25L and 200L drums.

By implementing INNOVA MT 065, industries in Bihar can significantly reduce the frequency of chemical cleanings and extend the operational life of their membranes, leading to lower operational costs. As a pioneer in water technology, we provide a comprehensive range of ETP, RO, and boiler water products, delivering high-quality fluid additives and filter media solutions at an affordable price to ensure the peak performance of your industrial water treatment infrastructure throughout Bihar.

Benefits in Bihar :

  • Highly Effective Calcium sulphate inhibitor for local industrial water
  • Effective against iron and calcium carbonate found in the region
  • Compatible with all membrane types used in the capital city
  • Cost-Effective treatment for all brackish and water systems in Bihar
  • Liquid product, easy to handle for local plant operators

Treatment & Dosage Requirements in Bihar:

    In calculating the dose rate of INNOVA MT 065 for facilities in Bihar, the membrane manufacturer's operating limits and local feed water quality should be strictly considered. All dose rate calculations should be made on the computer projection programme "e-WATER 5.0", which calculates the Ipb/Ksp ratio for calcium sulphate and other potential scaling salts specific to the Bihar water table.

    For Ipb/Ksp ratios < 3 the preferred product of choice is Tacelene Chem-7065; for ratios 2.8 to 7.0, INNOVA MT 065 is normally dosed at 5.0 to 25 mg/L in the concentrate, which is equivalent to 2.5 to 6 mg/L in the feed water for Bihar based systems, dependent on the system recovery.

    INNOVA MT 065 can be diluted with product water and should be applied continuously by means of a suitable metering pump. For the tea processing and rubber industries in Bihar, continuous feed is essential since calcium sulphate is difficult to remove once precipitation has occurred in local filtration units.

Principle Of Uses:

    INNOVA MT 065 has been developed specially as a calcium sulphate inhibitor, for waters with CaSO4 Ipb/Ksp ratio of 2.8 to 7.0. It functions by a powerful threshold mechanism of calcium carbonate, and is highly tolerant to the presence of iron.