Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of Antiscalant for High Silica Water – RO Membrane Protection from Silica Fouling in Bihar

Antiscalant For High Silica Water (INNOVA MT 066)
Antiscalant For High Silica Water (INNOVA MT 066) in Bihar

Antiscalant For High Silica Water (INNOVA MT 066) in Bihar

Innova Corporate (India) supplies a specialized Antiscalant for High Silica Water to address a critical challenge in Bihar's groundwater. In certain districts (e.g., parts of Patna, Vaishali, Samastipur), silica levels can be elevated (40-80 ppm as SiO₂), making silica scaling problematic in high-recovery RO systems used by sugar mills, pharmaceuticals, and food processing plants. Our antiscalant contains amine-functionalized polymers and proprietary silica inhibitors that prevent amorphous silica polymerization and magnesium silicate formation. It is effective up to 150 ppm silica and at pH 7-10. Field trials in Bihar sugar mill RO plants have shown a 60% extension in membrane cleaning intervals. As Bihar pushes for water reuse under the Namami Gange programme, this product is essential for sustainable industrial water management. Available in 200L drums and 1000L IBCs.

Our advanced INNOVA MT 066 technology is designed to extend membrane longevity for Bihar based industries, ensuring uninterrupted operation even when dealing with the fluctuating feed water quality typical of the region. This high-performance antiscalant reduces the need for frequent chemical cleanings and lowers operational risks, making it an essential solution for rubber smokehouses and tea processing machinery in Bihar requiring high-silica protection in their industrial water treatment plants.

Treatment & Dosage Requirements in Bihar :

    In calculating the dose rate of Tacelene Chem-7066 for industrial units in Bihar, the membrane manufacturer's operating limits and local feed water quality should be strictly considered. All dose rate calculations for the city's water systems should be made on the computer projection programme "e-WATER 5.0", which calculates the SCR for Silica based on regional mineral profiles.

    Generally recommended dosage for Bihar facilities is 1 ppm in the feed water for every 6 to 7ppm of total silica in the feed water, depending on the operating pH and temperature of the local processing environment.

    At 25°C, pH 7 to 7.5 with 240mg/l silica in the concentrate, Tacelene Chem-7066 is normally dosed at 5.0 to 10 mg/L. For operations within Bihar, Tacelene chem.-7066 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed and correct levels are essential for the capital city's machinery, since silica fouled membranes are difficult to clean.

    When both dissolved and colloidal silica is present in the Bihar water supply, silica fouling can be difficult to predict because of the complexity of the silica reaction chemistry.

    Preventing the formation of substrate material like insoluble calcium and iron salts is required in eliminating silica fouling for local tea and rubber industries. We recommend very effective auto flushing devices to be applied with the high silica waters typically found across Bihar.

Principle Uses

    Tacelene chem.-7066 has been developed specially as a SILICA inhibitor, for waters with SCR <1.3 to 4.2 mg/l.

    For Ipb/Ksp ratios < 3 the preffered product of choice is Tacelene Chem-7065; for ratios 2.8 to 7.0, INNOVA MT 065 is normally dosed at 5.0 to 25 mg/L in the concentrate, which is equivalent to 2.5 to 6 mg/L in the feed water, dependent on the system recovery.

    INNOVA MT 065 can be diluted with product water and should be applied continuously by means of a suitable metering pump. Continuous feed is essential since calcium sulphate is difficult to remove once precipitation has occurred.

Handling:

    Do not store the material in open, store in cool dark place away from direct sunlight. Keep the container tightly closed when not in use. This product exhibits very low order of oral toxicity. No special care is required in handling this product.

    Avoid contacts with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times. If swallowed drink large amount of water or milk and get medical attention immediately. Do not re-use the empty container, destroy it.