Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA SP 415 – Cationic Colour Precipitant Coagulant for Wastewater Treatment in Baddi

Coagulant Cationic Colour Percipitant (INNOVA SP 415)
Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Baddi

Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Baddi

Innova Corporate (India) offers a Coagulant Cationic Colour Precipitant – a high-charge-density cationic polymer for Baddi's textile dyeing effluent color removal. The textile industry in Baddi (small but significant cluster) discharges highly colored wastewater containing reactive, direct, vat, and disperse dyes. Additionally, pharma effluent may contain colored compounds from intermediates. Our coagulant is based on polyDADMAC or high-MW polyamine with charge density >5 meq/g. It works by neutralizing the negative charge of dye molecules, causing rapid flocculation and precipitation. For Baddi's textile CETPs, this coagulant reduces color by up to 95% at dosages of 50-150 ppm. It also precipitates hydrolyzed reactive dyes that escape biological treatment. For pharma ZLD plants, it helps remove color before RO. The product works optimally at pH 6-9 and is compatible with anionic flocculants (polyacrylamides). Field data from a Baddi textile CETP showed that using this coagulant before UF reduced membrane fouling by 60%. For zero liquid discharge (ZLD) systems (mandated by HPPCB for pharma and textile), color removal is critical to prevent RO membrane staining. Our product also removes some COD (20-30%) and turbidity (80-90%). Available as a 20-40% active liquid. Dosing via magnetic flow meter controlled pumps. Pack sizes: 30kg carboys, 200kg drums, and 1000kg IBCs. We provide jar testing services and color measurement (ADMI).

Features :

    High percentage of decolourising can be obtained.

    Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.

    Simple to use

    No capital cost involved.

Dosage & Feeding :

    The percentage decolourisation obtained depends upon the INNOVA SP 415 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    It is desirable that some contact time to be permitted so that the colouring matters and other impurities get a chance of attaching themselves to the INNOVA SP 415 molecules. Higher dilution is necessary because of the concentrated nature of INNOVA SP 415; dilution at a level of 1:20, with water, is recommended prior to its being dosed.

    Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Storage & Handling :

    INNOVA SP 415 has a long shelf life it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.