Manufacturers, Exporters and Suppliers of INNOVA BW 304 – Catalyzed Oxygen Scavenger for Rapid Oxygen Removal in Boiler Feedwater in Ahmedabad

Deposit Controller 304 is a specialized iron and manganese dispersant from Innova Corporate, crucial for Ahmedabad's groundwater-based industries. Many deep borewells in Ahmedabad's industrial areas – Sanand, Changodar, Naroda, and parts of Vatva – have elevated levels of dissolved iron (Fe²⁺, 1-5 ppm) and manganese (Mn²⁺, 0.5-2 ppm). These metals are not a problem in the reduced state (clear water), but upon exposure to air (in cooling tower basins, storage tanks, or after pH increase) they oxidize to ferric hydroxide (Fe(OH)₃ – reddish-brown rust) and manganese dioxide (MnO₂ – black deposits). These precipitates foul cooling tower fill media (causing mud balls), stain equipment (pumps, pipes, and product surfaces), and promote under-deposit corrosion. Deposit Controller 304 contains a low-molecular-weight polyacrylate (MW 2000-3000) and a phosphonate (usually HEDP or PBTC) that chelate iron and manganese ions, keeping them in solution even at pH 8.5-9.0 (typical cooling water pH). For already precipitated iron flocs, the product disperses them so they can be removed via blowdown. For Ahmedabad's hotels and commercial buildings using groundwater for cooling towers (many on SG Highway and Prahlad Nagar), iron fouling is a common complaint – brown staining on cooling tower louvers and heat exchangers. Adding Deposit Controller 304 at 5-20 ppm solves this problem. For textile processing units using groundwater for dyeing, iron stains on white or light-colored fabric are a major quality issue. Adding Deposit Controller 304 to the dye bath or the feed water at 10-30 ppm prevents iron from depositing on fabric. For reverse osmosis (RO) pretreatment, iron can foul RO membranes irreversibly (catalytic degradation of polyamide); our deposit controller added before cartridge filters (after oxidation and multimedia filtration) extends membrane life. Dosage: 5-20 ppm depending on iron concentration (1 ppm Fe requires approx 5-10 ppm product). It is compatible with scale inhibitors and most biocides (except strong oxidizers at high concentration). Available as a 30% active liquid (amber color). We provide iron test kits (ferrozine or phenanthroline method) for monitoring iron levels before and after treatment. For closed loops with iron corrosion problems (e.g., old chilled water systems), use Deposit Controller 304 alongside a corrosion inhibitor for synergistic protection. Pack sizes: 25L, 200L drums. Shelf life: 18 months.