Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
- Call Us for help!
- +91-9911981992
- Mail Us
- sales@innovacorporate.com
Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Agra
Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Agra
Flocculant Cationic Poly Electrolyte PE-613 is a very high molecular weight (>15 million Da), low charge density (10-20 mole%) cationic polyacrylamide (CPAM) from Innova Corporate, designed for sludge dewatering and high-solids clarification in Agra's effluent treatment plants (ETPs), especially for tanneries and municipal sewage. This polymer produces large, shear-resistant flocs that release water readily, ideal for belt press, centrifuge, and screw press dewatering. For Agra's leather tannery CETP, where sludge is a mixture of biological and chemical (chrome) sludge, PE-613 achieves cake solids of 25-30%, reducing disposal cost by 40%. For textile ETPs with dyed sludge, it captures color bodies and reduces filtrate turbidity to <50 NTU. The product is supplied as white free-flowing granules (100% active). It must be dissolved at 0.1-0.3% concentration in soft water with gentle stirring. Dosage: 3-12 kg per ton of dry solids. For Agra's hotel STPs (sewage treatment), PE-613 effectively dewaters activated sludge with minimal polymer consumption. We also provide on-site polymer selection via jar testing and capillary suction time (CST) analysis. The product is anionic incompatible – do not mix. Available in 25kg bags with inner polyliner. For Agra's marble processing units, this flocculant settles fine CaCO₃ slurry rapidly. Technical data: charge density 1.2-1.5 meq/g, residual monomer <0.05%.
This product is effective over a wide range of pH and has great flexibility in coping with fluctuations in operating conditions throughout Agra. With their remarkable settling properties, they rapidly bring clarifier sludge levels under control when "difficult" process waters are treated in the region's environmental facilities.
Advantages:
- Good floc formation.
- Efficient removal of colloidal silica.
- Efficient removal of colloidal silica.
- Improved clarity in filtrate.
- Rapid settling.
- Sizable reduction in organics.
Increased throughput.
Features :
Easy to prepare solution.Effective at low dosages.
ompletely miscible with water.
Directions for Use:
INNOVA PE 613 may be unloaded manually or taken directly in to the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.
Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended. We will recommend the dosing equipment best suited for your requirement.
Dosage :
Recommended dosage is in the range of 0.5 to 1.0 ppm depending on the water quality
Handling :
Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.
Packing :
INNOVA PE 613 is available in 25Kgs & 50Kgs.