Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BCD 501 – MBT Based Biocide for Corrosion Prevention & Microbial Control in Water Systems in Agra

Biocides MBT Based (INNOVA BCD 501)
Biocides MBT Based (INNOVA BCD 501) in Agra

Biocides MBT Based (INNOVA BCD 501) in Agra

MBT-based biocides (Methylene bis-thiocyanate) are offered by Innova Corporate as a powerful non-oxidizing biocide specifically effective against sulfate-reducing bacteria (SRB) and slime-forming organisms in Agra's anaerobic environments. MBT is particularly useful in closed systems, oilfield water injection, and cooling towers where biofilm control is critical. For Agra's industrial units with long retention times (e.g., closed loop cooling systems in hotels, firewater storage tanks), MBT provides sustained activity (half-life 5-10 days) without breaking down quickly in high temperatures (stable up to 60°C). It works by inhibiting microbial respiration and energy production. MBT is less volatile than glutaraldehyde and has minimal odor, making it suitable for indoor applications. In Agra's dairy and food processing plants, MBT is used in pasteurizer cooling water (indirect contact) at 10-25 ppm. It shows synergy with isothiazolines and DBNPA. However, MBT is not compatible with oxidizing biocides like chlorine or bromine, and it may be deactivated by reducing agents (sulfite, bisulfite). For severe SRB problems in Agra's tanneries (where hydrogen sulfide odor is common), a shock dose of 100-200 ppm for 24-48 hours eliminates SRB colonies deep in pipelines and dead legs. The product has limited algae control – use with algicide if needed. MBT is stable in storage for 12 months but may crystallize below 10°C (store in warm conditions).

Advantages in Agra:

  • It is a highly effective microbiocide tailored for Agra's specific water mineralogy and microbial profiles.

Dosage :

    Dosage in cooling water treatment programs 25 to 45 ppm for effective control of biocide activity, for cooling waters.

Method of Feeding :

    INNOVA BCD 501can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.

Feed Requirements :

    Badly fouled systems must be cleaned before treatment to start. INITIAL DOSE - When the system is noticeably fouled, slug feed 25 to 50 ppm of INNOVA BCD 501 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 20 to 40 ppm of INNOVA BCD 501.

Control Testing :

    The best indication of the successful application of INNOVA BCD 501 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment.

    Uses of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved.

Packing :

    INNOVA BCD 501 is available in 25Kgs, 50Kgs & 200 Kgs.