Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BW 403 – Advanced Deposit Controller for Scale & Sludge Control in Boiler Systems in New-delhi

Deposit Controller (INNOVA BW 403)
Deposit Controller (INNOVA BW 403) in New-delhi

Deposit Controller (INNOVA BW 403) in New-delhi

Innova Corporate (India) offers Deposit Controller 403, a specialty antiscalant for reverse osmosis systems across New Delhi. RO plants face scale (calcium carbonate, calcium sulfate, nitrate, fluoride, silica) from high TDS (800-2500 ppm), high hardness (400-800 ppm), high nitrate (50-150 ppm), high fluoride (1.5-4 ppm), and moderate silica (15-40 ppm). The product provides threshold inhibition against calcium carbonate (LSI +2.5), calcium sulfate (SI 4.0), and silica (up to 250 ppm). Typical dosage: 2-10 ppm. By using this product, New Delhi industries achieve extended RO membrane life (2-3 years vs 1-2 years), reduced cleaning frequency (50-70% fewer), and lower operating costs.

Application:

    The specific corrosion inhibitors in INNOVA BW 403 provide corrosion protection by the formation of a protective passive film on the metal surfaces. The protective layer prevents direct contact of the corrosive media (water) with the metal surface.

    INNOVA BW 403 also contains powerful threshold inhibitor to prevent scale formation in feed water pipelines and boiler internals. The crystal distorter and specific dispersant incorporated in the product ensures high mobility of the phosphate sludge formed so that it is easily removed by blow down. The dispersant also ensures that suspended particulate matter do not accumulate and are removed by the blow down.

Advantages:

  • Affords excellent corrosion protection.
  • Prevents deposition of hardness salts.
  • Ensures high mobility of phosphate sludge.
  • Broad spectrum vapour/liquid distribution ratio
  • Good dispersion of suspended particulate matter.
  • iSmple control tests.
  • Can be dosed directly without dilution.
  • Compatible with other Boiler water treatment program.

Dosage & Feeding:

    INNOVA BW 403 can be dosed directly without dilution. Normally a phosphate reserve is maintained in the boiler water. The proper treatment levels vary with factors like boiler system, operating conditions, boiler pressure and water Characteristics. The product Characteristics and viscosity permit easy feeding by on-line dosage pumps. The desired feeding mode is the continuous injection to feed water.

Handling:

    Avoid contact with eye or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention. In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention. Avoid extremes of temperature and wear gloves and goggles wherever appropriate.

Compatibility:

    INNOVA BW 403 is compatible with almost all products used in total boiler water Treatment program.

Packing:

    INNOVA BW 403 is compatible with almost all products used in total boiler water Treatment program.