Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA SP 415 – Cationic Colour Precipitant Coagulant for Wastewater Treatment in Gujarat

Coagulant Cationic Colour Percipitant (INNOVA SP 415)
Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Gujarat

Coagulant Cationic Colour Percipitant (INNOVA SP 415) in Gujarat

Innova Corporate (India) offers a specialized Cationic Coagulant and Colour Precipitant for effluent treatment and process water clarification across Gujarat's textile, pharmaceutical, and chemical industries. Facilities in Surat (textile capital), Ahmedabad (Vatva), Ankleshwar, and Vapi dealing with colored effluents from textile dyeing, pharmaceutical synthesis, and chemical processing face challenges in removing suspended solids, color, and organic contaminants before discharge to meet GPCB norms and ZLD requirements. Our product is a high molecular weight cationic polymer that works through charge neutralization and bridging mechanisms. The positive charge neutralizes negatively charged colloidal particles (dyes, organic compounds, color bodies), causing them to agglomerate into larger flocs that settle rapidly. It is particularly effective for removing anionic dyes (reactive, direct, acid dyes) from textile effluents, color from pharmaceutical waste, and dispersed solids. Key applications include textile dye house effluent treatment (Surat - color removal), pharmaceutical effluent treatment (Ahmedabad, Ankleshwar), and industrial ETP as primary coagulant. The product offers rapid floc formation (settling within 5-15 minutes), high color removal efficiency (up to 90-95%), reduced sludge volume compared to inorganic coagulants, and effectiveness across pH 5-9. Typical dosage ranges from 5-50 ppm as 0.1-0.5% solution. By using our product, Gujarat industries can achieve compliance with GPCB color discharge standards, reduced ETP chemical costs, improved effluent clarity, and potential for water reuse within ZLD systems.

Features :

    High percentage of decolourising can be obtained.

    Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.

    Simple to use

    No capital cost involved.

Dosage & Feeding :

    The percentage decolourisation obtained depends upon the INNOVA SP 415 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    It is desirable that some contact time to be permitted so that the colouring matters and other impurities get a chance of attaching themselves to the INNOVA SP 415 molecules. Higher dilution is necessary because of the concentrated nature of INNOVA SP 415; dilution at a level of 1:20, with water, is recommended prior to its being dosed.

    Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Storage & Handling :

    INNOVA SP 415 has a long shelf life it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.