Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BCD 500 – Glutaraldehyde Based Biocide for Industrial Water & Biofilm Control in Bhutan

Biocides Glutraldehyde Based (INNOVA BCD 500)
Biocides Glutraldehyde Based (INNOVA BCD 500) in Bhutan

Biocides Glutraldehyde Based (INNOVA BCD 500) in Bhutan

Innova Corporate (India) supplies Glutaraldehyde (25% or 50%), a broad-spectrum, non-oxidizing biocide for Bhutan's industrial water treatment. For cooling towers at industrial facilities and hydropower plants, glutaraldehyde is a workhorse biocide for weekly shock dosing at 50-150 ppm. It is also used for RO membrane sanitization in pharma and food plants. Its half-life in water is 2-10 days, and it is synergistic with quaternary ammonium compounds. Available in 25L carboys and 200L drums.

Our INNOVA BCD 500 is an ideal solution for cooling towers, oilfield water systems, and paper mills in Bhutan, where high stability and deep penetration are critical for performance. It works effectively across a wide pH range common in the region's water sources, offering a reliable and sterile operating environment that optimizes heat transfer and prevents costly downtime. This robust biocide is a cornerstone for maintaining efficient industrial water treatment processes and protecting high-value assets throughout the city.

Advantages in Bhutan:

  • INNOVA BCD 500 is a superior bactericide for Bhutan industries, especially with difficult and persistent organisms due to its excellent penetrating ability.
  • It is highly effective against SRBs and Biofilms found in local cooling circuits and is readily Biodegradable, ensuring environmental safety for the capital city.

Dosage :

    Dosage in cooling water treatment programs 100 to 125 ppm for effective control of biocide activity, for cooling waters. Although heavily slimed cooling systems may need 200 to 300 ppm as an initial, cleanup shock dose.

Method of Feeding :

    INNOVA BCD 500 can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.

Feed Requirements :

    Badly fouled systems must be cleaned before treatment to start. INITIAL DOSE - When the system is noticeably fouled, slug feed 100 to 150 ppm of INNOVA BCD 500 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 80 to 125 ppm of INNOVA BCD 500.

Control Testing :

    The best indication of the successful application of INNOVA BCD 500 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment.

    Use of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved.

Packing :

    INNOVA BCD 500 is available in 25Kgs, 50Kgs & 200 Kgs