Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA BCD 504 – TCMTB Based Biocide for Broad-Spectrum Control of Fungi, Algae & Bacteria in Bhiwadi

Biocides TCMTB Based (INNOVA BCD 504)
Biocides TCMTB Based (INNOVA BCD 504) in Bhiwadi

Biocides TCMTB Based (INNOVA BCD 504) in Bhiwadi

Innova Corporate (India) offers Thione-based biocides (2-mercaptobenzothiazole – MBT, or sodium salt) for Bhiwadi's metalworking fluids, closed-loop water systems, and industrial lubricants used in automotive component manufacturing, engineering workshops, and steel mill maintenance. Thione compounds are effective against Pseudomonas species that form tenacious biofilms. For Bhiwadi's engineering workshops and automotive parts manufacturers, thione-based biocides are added to cutting fluids, grinding fluids, and hydraulic oils to prevent rancidity and bacterial degradation. Typical dosage: 50-150 ppm initially, then 10-30 ppm weekly extends fluid life from 3 months to over 12 months. In closed cooling loops (chillers, diesel generator jackets, process cooling in steel mills), thione provides long-term preservation up to 80°C (176°F) and over pH 6-10. It works by chelating essential metal ions from microbial enzymes. Thione is non-foaming, non-volatile, and has very low odor. However, it can stain yellow metals (copper, brass) at high concentrations. For steel mill cooling systems with copper heat exchangers, we recommend lower dosage or use of tolyltriazole (TTZ) corrosion inhibitor. The product is available as a 40-50% active liquid dispersion and as a 98% active powder. Available in 25L, 200L drums (liquid) and 25kg bags (powder). We provide on-site microbial dip slides and plate counts to monitor fluid health. For Bhiwadi's small engineering units, we supply thione in convenient 5L pails. Shelf life: 24 months.

Advantages:

  • INNOVA BCD 504 is a good fungicide for control of wood rot.

Dosage :

    Dosage in cooling water treatment programs 20 to 50 ppm for effective control of biocide activity, for cooling waters.

Method of Feeding :

    INNOVA BCD 504 can be fed as received or diluted with water minimum 10% concentration with any chemical feed solution. The chemical should be added to cooling tower basin (or any other point, which provides uniform mixing) addition should be made to metering pump to minimize handling.

Feed Requirements :

    Badly fouled systems must be cleaned before treatment to start. INITIAL DOSE - When the system is noticeably fouled, slug feed 40 to 75 ppm of INNOVA BCD 504 in the system. SUBSEQUENT DOSE - When the Microbial count is evident, slug feed 30 to 65 ppm of INNOVA BCD 504.

Control Testing :

    The best indication of the successful application of INNOVA BCD 504 is visual inspection of tower surfaces or monitoring changes in heat transfer on metal surface of process equipment.

    Uses of on-site bacterial counts or microscopic examination provide relative indicators of system cleanliness and biological control. If bacteria counts are used, Note that counts may be high immediately after biocide addition. Counts will be lower as control is achieved.

Packing :

    INNOVA BCD 504 is available in 25Kgs, 50Kgs & 200 Kgs.