Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 613 – Cationic Poly Electrolyte Flocculant for Sludge Dewatering & Effluent Treatment in Ballabhgarh

Flocculant Cationic Poly Electrolyte (INNOVA PE 613)
Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Ballabhgarh

Flocculant Cationic Poly Electrolyte (INNOVA PE 613) in Ballabhgarh

Innova Corporate (India) offers Flocculant Cationic Poly Electrolyte PE-613 – a very high molecular weight (>15 million Da), low charge density (10-20 mole%) cationic polyacrylamide for sludge dewatering of municipal sewage and mixed industrial sludge in Ballabhgarh's ETPs and CETPs. This polymer produces large, shear-resistant flocs that release water readily, ideal for belt presses, centrifuges, and screw presses. For Ballabhgarh's municipal STPs (serving the growing population and industrial workforce), PE-613 effectively dewaters activated sludge. For automotive CETPs, where sludge is a mixture of paint detackification sludge, biological sludge, and oily sludge, PE-613 achieves cake solids of 25-30%, reducing disposal cost by 40%. For steel mill sludge (iron oxide), this polymer works well. The product is supplied as white free-flowing granules (100% active). It must be dissolved at 0.1-0.3% concentration in soft water with gentle stirring for 30-60 minutes. Dosage: 3-12 kg per ton of dry solids. For Ballabhgarh's hotel STPs (growing hospitality), PE-613 effectively dewaters activated sludge. We also provide on-site polymer selection via jar testing and capillary suction time (CST) analysis. The product is anionic incompatible. Available in 25kg bags with inner polyliner. For automatic preparation, we supply polymer make-down units (volumetric screw feeder + wetting cone + aging tank). Technical data: charge density 1.2-1.5 meq/g, residual monomer <0.05%. Also available as liquid emulsion (30-50% active).

Advantages:

  • Good floc formation.
  • Efficient removal of colloidal silica.
  • Efficient removal of colloidal silica.
  • Improved clarity in filtrate.
  • Rapid settling.
  • Sizable reduction in organics.

    • Increased throughput.

Features :

    Easy to prepare solution.Effective at low dosages.

    ompletely miscible with water.

Directions for Use:

    INNOVA PE 613 may be unloaded manually or taken directly in to the dilution tank from the container. Prepare stock solution (1.0 to 1.5% w/v) of the polyelectrolytes using clear filtered water.

    Prepare feed solution by diluting the stock solution directly or by on-line using filtered water. For small chemicals can be dosed by gravity or by dosing equipment. However, for large systems use of dosing system is recommended. We will recommend the dosing equipment best suited for your requirement.

Dosage :

    Recommended dosage is in the range of 0.5 to 1.0 ppm depending on the water quality

Handling :

    Do not store the material in open. Keep the container tightly closed when not in use. These products exhibit very low order of oral toxicity. No special care is required in handling this product.

Packing :

    INNOVA PE 613 is available in 25Kgs & 50Kgs.