Manufacturers, Exporters and Suppliers of Coagulants for Water & Wastewater Treatment – Organic & Inorganic Solutions in Badli

Innova Corporate (India) offers a complete range of coagulants for Badli's water and wastewater treatment applications – covering inorganic coagulants (alum, ferric chloride, ferric sulfate, polyaluminum chloride – PAC, ACH), organic coagulants (cationic polymers – polyDADMAC, polyamine, polyacrylamide-based), and natural coagulants (chitosan derivatives). Each product is selected based on Badli's specific water quality challenges: groundwater (TDS 1500-2500 mg/L, hardness 400-700 ppm, high iron, moderate silica), and industrial effluents (steel – oil, grease; automotive – paint, metals; engineering – cutting fluids). For municipal drinking water treatment in Badli and Bahadurgarh, we supply NSF/ANSI Standard 60 certified PAC that achieves turbidity <1 NTU at lower dosages (10-30 ppm) than alum, produces less sludge, and works over wider pH (6-9). For effluent treatment in steel mills, we recommend ferric chloride or PAC for removing oil and suspended solids. For automotive paint shop wastewater, PAC or ferric sulfate with a cationic polymer works well for paint detackification. For engineering workshop effluent, alum or PAC with anionic polymer clarifies cutting fluid waste. Our product line also includes coagulant aids (bentonite, activated silica). We provide full jar testing support to optimize coagulant type and dosage. All coagulants available in bulk tankers, 200L drums, and 25kg bags (powder). For ZLD systems (mandated for industrial clusters), we provide coagulants with low sulfate/chloride content to minimize scaling in evaporators. We also supply automated coagulant dosing systems with pH and turbidity feedback.