Welcome to our Water Treatment Company!
We'are Open: Mon - Sat 10:00 AM - 06:00 PM
  • Call Us for help!
  • +91-9911981992
  • Mail Us
  • sales@innovacorporate.com

Manufacturers, Exporters and Suppliers of INNOVA PE 607 – High Performance Cationic Polyelectrolyte Coagulant for Wastewater & Sludge Treatment in America

Coagulant Cationic Poly Electrolyte (INNOVA PE 607)
Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in America

Coagulant Cationic Poly Electrolyte (INNOVA PE 607) in America

Innova Corporate (India) supplies Coagulant Cationic Poly Electrolyte PE-607 – an ultra-high charge density (>9 meq/g), low molecular weight (approx. 300,000-500,000 Da) liquid coagulant for US industrial effluents containing colloidal silica, clay, and organic colloids. This product is ideal for reverse osmosis pretreatment in US power plants, semiconductor fabs, and food processors where colloidal fouling (SDI >3) is a major issue. In US surface waters (Mississippi River, Ohio River, Great Lakes), turbidity can spike during spring runoff or storms – PE-607 neutralizes colloids for removal by media filtration. For car wash and industrial laundry wastewater (common across US), it clarifies recycle water. Unlike aluminum or iron salts, PE-607 does not add dissolved solids – critical for RO feed. Dosage: 20-80 ppm. Forms pin flocs that settle quickly or float in DAF. Available as 10-15% active liquid in 25L, 200L drums, 1000L IBCs. We provide jar test kits, SDI measurement, and turbidity testing for US customers.

Features :

  • High percentage of decolourising can be obtained.
  • Because of its cationic nature, it helps in the Dorr clarifier by where an Ionic flocculant is used for floc formation.
  • Simple to use
  • No capital cost involved.

Dosage & Feeding:

    The percentage decolourisation obtained depends upon the INNOVA PE 607 quantity used, upto certain limits. Under normal conditions, 10 to 20 ppm, on juice is sufficient to achieve a high degree of decolourisation. The dosing point should be into the sulphited juice entering the Dorr Clarifier or in the mixed juice tank.

    Higher dilution is necessary because of the concentrated nature of INNOVA PE 607 dilution at a level of 1:20, with water, is recommended prior to its being dosed. Dosing pumps should be used for dosing the diluted product to ensure thorough and proportionate mixing. Product dilution and feeding should be done from plastic barrels only.

Dosage & Feeding:

    INNOVA PE 607 has a long shelf life; it should be stored at ambient temperature. Avoid contact with eyes, skin and food. In case of contact, immediately flush eyes or skin with large amount of water several times.

Packing :

    INNOVA PE 607 is available in 25Kgs & 50Kgs drum.