Paint Additives Biocide, Paint Additives Biocide manufacturer in Shirdi, Paint Additives Biocide suppiler in Shirdi, Paint Additives Biocide dealer in Shirdi, Paint Additives Biocide, boilercoolingtowerchemicals.com

Appearance	Colourless To Pale Yellow Clear Liquid
Odour	Mild
Density 20°C	1.020-1.032 g/cm3
pH @ 20°C	2.0-3.0
Refractive Index	1.3380 - 1.3440
Solubility	Fully Soluble In Water, Most Lower Alcohols And Glycols
Stability	Stable In The Presence Of Light, Over Ph Range 2-9 And Temperature Up To 60°C

INNOVA PA 992 is suitable for the wet-state preservation of a wide range of aqueous products including paints, polymer emulsions, adhesives, ceramic glazes, fillers and sealants and as a tank side additive for ready-diluted metalworking fluids.

Normal use concentrations are in the range 0.05 - 0.40%, depending on the product to be protected and the environmental conditions to which it will be exposed. The local Innova Technical Centre can assist in determining the precise concentration required for specific applications.

INNOVA PA 992 can be added at any time during manufacturing. However, it is advised to add it as early as possible to give protection throughout the production process. Care should be taken to ensure that temperature, pH and redox potential at the point of addition are suitable for stability of the product.

INNOVA PA 992 is compatible with most formulations in which its application is recommended. Reducing agents amines and other strong nucleophiles can cause degradation of the active ingredients. Users are therefore advised to carry out their own tests or seek further advice from Innova prior to initial application.

Packing : 25Kgs and 200Kgs plastic drums & Shelf Life 18 months from production date when stored at approximately 20 °C.

Innova Corporate (India)