Sludge Conditioner For Low & Medium Pressure Boilers In Assam


INNOVA BW 502 is an excellent sludge conditioner specially designed for the internal treatment of boiler water. It also contains highly effective antiscalants cum antifoulants to afford total protection against scale and deposit formation.

INNOVA BW 502 is non-corrosive and clearly outperforms the conventional polymers. A unique single blend for low and medium pressure boilers, using low temperature unsoftened feed water, having maximum 30 ppm of total hardness in feed water.



Appearance: Slight Yellowish To Straw Coloured Liquid


pH: Neutral


Wt/ml (In gms): Complete


  • Application:

    INNOVA BW 502 is recommended for use in low to medium pressure boilers (upto 20 kg/cm2). In most such boilers, the feed water may not be pretreated with base exchange softenersINNOVA BW 502 ensures that no sludge is deposited even under these conditions.

    However, with extremely hard water it is advisable to soften or partially demineralise the water. Also, the maximum available condensate (uncontaminated) should be returned for boiler feed.

    The strong synthetic dispersant in INNOVA BW 502 ensures that deposits or complex phosphates if and when formed are kept in a dispersed state and removed during boiler blow-down. INNOVA BW 502 also gradually removes any scales or deposits that have formed earlier.



  • Ready and easy to use liquid.
  • Retains higher levels of hardness in the water and thus holds blow-down to a minimum.
  • Keeps heat transfer surfaces clean and permits maximum heat exchange efficiency.
  • Excellent control of calcium phosphate sludge and iron fouling.
  • It also ensures no priming, foaming, or carryover of salts in the steam.
  • Has no corrosive action

  • Dosage & Feeding:

    The normal dose level of INNOVA BW 502 is 2 - 10 ppm based on the boiler feed water but this again depends on the quality of the feed water and may vary for individual installations. The ideal method of feeding is by dosing pumps either electronic or electro-mechanical.


  • Handling:

    Avoid contact with eye or prolonged contact with skin. Do not take internally. In case of contact with skin, wash with plenty of water. In case of contact with eyes, flush with plenty of water and seek immediate medical attention.

    In case of ingestion, wash mouth thoroughly and drink plenty of water. Do not induce vomiting and seek medical attention. Avoid extremes of temperature and wear gloves and goggles wherever appropriate.


  • Compatibility:

    Avoid contact with skin and eyes, do not take internally. In case of contact with skin, flush with plenty of water and seek immediate medical attention. Gloves and goggles should be used where appropriate.


  • Packing:

    INNOVA BW 502 is available in 25kgs, 50 kgs & 200 kgs.

To Know More Click On The Products From Product List Or.

Call Us at

  • +91-9312-871-070
  • +91-9911-130-697
  • +91-9911-981-992

  • Or E-mail Us at